Ask A Question

 

For More Information

To get more information on our split rail trolley systems, please feel free to contact Denise Louder, our Product Manager for this line of products, at (301) 829-6227, or email her via our contact page.

Home > Rail Shop Equipment > Split Rail Trolley Systems

Split Rail Trolley Systems

The Macton split rail trolley system provides a safe and easy method for single wheel set change-out. The railcar is positioned on a raised rail with the wheel set to be changed over the split rail section. The trolley is moved into position under the axle, plugged into a 480V outlet and used to lift the weight of the wheel set off of the rails. Once the wheel set weight is off the rails, the truck frame can be supported and the rail sections can be opened to lower and remove the wheel set. A wheel set cart may then be used to transport the wheel set to other areas of the shop while the hydraulic jacking trolley is used to mount a new wheel set on the car. The trolley system is battery powered for linear travel along the rails and is operated by infrared remote control. Optional adapters may be used to remove other under-car components.

Split Rail System Split Rail Dolly

 

 

Long-Term Reliability – Macton split rail trolley systems have been in service for years and move smoothly and quietly day in and day out for years – in fact, to our knowledge, none of these systems has ever failed to operate within the specified design criteria where proper minimal maintenance was performed.

Minimal Maintenance Required – These systems require only a minimal amount of routine maintenance each year, which can be scheduled for times when the facility is not normally in operation – as a result, this minimal annual maintenance does not entail operational disruptions or expensive downtime for the servicing of this equipment.

Full Support Throughout Project – Macton provides full support throughout the entire project, beginning with the initial design of the system to be built, during which time Macton’s engineering staff interfaces with the project’s engineers and other professionals to provide the practical assistance and the detailed technical support needed to integrate its equipment into the overall installation.

Ease of Equipment Installation – Macton provides a specially-trained field engineer or technician to supervise the installation, start-up and commissioning of its equipment, ensuring that it is brought on-line quickly and delivers the expected performance.

Ongoing Post-Sale Support – Macton also provides long-term spare parts and technical support services. Long-term service contracts are also available at each of these installations for periodic inspection and maintenance programs, as well as training services, as needed. In addition, Macton provides customers with the ability to easily upgrade their control panels, drives and other systems to ensure they reflect the latest in technology.

Standard 5 Year Warranty – The equipment is warranted to be free from defects in material or workmanship for a period of five (5) years from the date it’s shipped from Macton’s facility.  Accordingly, during such 5-year period, Macton will repair or replace any such defective parts or equipment at Macton’s cost (including covering all shipping costs).  If required to trouble-shoot such equipment, Macton will provide the services of an onsite field service engineer, and if any such defects are found to exist, Macton will pay the labor and travel costs of such field service engineer.  This warranty is void if the equipment is installed without supervision by a Macton representative.  This warranty does not cover: (i) water damage, or damage due to chemical corrosion or from dirt or debris on or around the equipment, (ii) any damage caused by improper use or accident, or from the failure to perform the recommended periodic maintenance on the equipment, (iii) normal wear and tear, (iv) portions of the equipment repaired or modified by others without Macton’s prior written approval, or (v) any additional onsite labor, tools or equipment required for the inspection, removal and reinstallation of any parts of the equipment.

Click on a photo to enlarge

  • DSC 0289
  • DSC 1611
  • DSC 1573
  • DSC 1605
  • DSC 0305
  • DSC 0311
  • DSC 0372
  • DSC 0375
  • DSC 0385
  • DSC 0386